Jahr
Year
Titel/Autor:in
Title/Author
Publikationstyp
Publication Type
2010 Gradient nanowires and nanotubes
Agarwal, S.; Eckhardt, B.; Grossmann, F.; Greiner, A.; Goring, P.; Wehrspohn, R.B.; Wendorff, J.
Zeitschriftenaufsatz
Journal Article
2010 Characterization and failure analysis of 3D integrated semiconductor devices-novel tools for fault isolation, target preparation and high resolution material analysis
Altmann, F.; Petzold, M.; Schmidt, C.; Salzer, R.; Cassidy, C.; Tesch, P.; Smith, N.
Konferenzbeitrag
Conference Paper
2010 Failure diagnostics for 3D system integration technologies in microelectronics
Altmann, F.; Schmidt, C.; Brand, S.; Czurratis, P.; Petzold, M.
Konferenzbeitrag
Conference Paper
2010 Combined electron beam induced current imaging (EBIC) and focused ion beam (FIB) techniques for thin film solar cell characterization
Altmann, F.; Schischka, J.; Ngo, V. van; Stone, S.; Kwakman, L.F.T.; Lehmann, R.
Konferenzbeitrag
Conference Paper
2010 Ultralow friction of reciprocating systems lubricated by mesogenic fluids
Amann, T.; Kailer, A.
Konferenzbeitrag
Conference Paper
2010 Ultralow friction of mesogenic fluid mixtures in tribological reciprocating systems
Amann, T.; Kailer, A.
Zeitschriftenaufsatz
Journal Article
2010 Damage modelling for simulation of process chain from forming to crash
Andrieux, F.; Sun, D.-Z.
Zeitschriftenaufsatz
Journal Article
2010 On the tribochemical action of engine soot
Antusch, S.; Dienwiebel, M.; Nold, E.; Albers, P.; Spicher, U.; Scherge, M.
Zeitschriftenaufsatz
Journal Article
2010 Overview of stress corrosion cracking of magnesium alloys
Atrens, A.; Winzer, N.; Dietzel, W.
Konferenzbeitrag
Conference Paper
2010 Dislocation-grain boundary interaction in <1 1 1> textured thin metal films
Bachurin, D.V.; Weygand, D.; Gumbsch, P.
Zeitschriftenaufsatz
Journal Article
2010 Accommodation processes during deformation of nanocrystalline palladium
Bachurin, D.V.; Gumbsch, P.
Zeitschriftenaufsatz
Journal Article
2010 Molecular dynamics study of plastic deformation of nanocrystalline palladium
Bachurin, DV.; Gumbsch, P.
Aufsatz in Buch
Book Article
2010 Modellierung und Simulation des Tiefziehverhaltens einphasiger Stähle am Beispiel von DC04
Baiker, M.; Helm, D.
Konferenzbeitrag
Conference Paper
2010 Efficiency of thin film silicon solar cells with spectral down-converter from rare-earth ion doped thin films
Baumgartner, K.; Ahrens, B.; Angelov, O.; Sendova-Vassileva, M.; Dimova-Malinovska, D.; Holländer, B.; Schweizer, S.; Carius, R.
Konferenzbeitrag
Conference Paper
2010 Photon down-conversion in Terbium(III)-doped thin dielectric films and fluorozirconate glasses for thin film solar cells
Baumgartner, K.; Holländer, B.; Carius, R.; Ahrens, B.; Angelov, O.; Sendova-Vassileva, M.; Dimova-Malinovska, D.; Schweizer, S.
Konferenzbeitrag
Conference Paper
2010 Microstructure and mechanical properties of laser ablation cleaned NiP platings for aluminum wire bonding
Bennemann, S.; Dresbach, C.; Lorenz, G.; Berthold, L.; Petzold, M.
Konferenzbeitrag
Conference Paper
2010 Fehlermechanismen an Leiterplattenmetallisierungen für bleifrei gelötete Packageaufbauten
Bennemann, S.; Simon, M.; Petzold, M.; Altmann, F.
Konferenzbeitrag
Conference Paper
2010 The effect of sample finishing on the tribology of metal/metal lubricated contacts
Berlet, P.; Dienwiebel, M.; Scherge, M.
Zeitschriftenaufsatz
Journal Article
2010 Verringerung von Reibung und Verschleiß durch optimierte spanende Endbearbeitung
Berlet, P.; Dienwiebel, M.; Kehrwald, B.; Scherge, M.
Zeitschriftenaufsatz
Journal Article
2010 Mikrostrukturentwicklung in Walzprozessen am Beispiel von DC04
Bienger, P.; Helm, D.
Konferenzbeitrag
Conference Paper
2010 On the intermetallic corrosion of Cu-Al wire bonds
Boettcher, T.; Rother, M.; Liedtke, S.; Ullrich, M.; Bollmann, M.; Pinkernelle, A.; Gruber, D.; Funke, H.-J.; Kaiser, M.; Lee, K.; Li, M.; Leung, K.; Li, T.; Farrugia, M.L.; O'Halloran, O.; Petzold, M.; März, B.; Klengel, R.
Konferenzbeitrag
Conference Paper
2010 Fabrication and characterization of reactive nanoscale multilayer systems for low-temperature bonding in microsystem technology
Boettge, B.; Braeuer, J.; Wiemer, M.; Petzold, M.; Bagdahn, J.; Gessner, T.
Zeitschriftenaufsatz
Journal Article
2010 Templated self-assembly of block copolymers - Toward the rational design of plasmonic nanorods
Bohley, C.; Yau, M.Y.E.; Erk, C.; Wang, Y.; Wehrspohn, R.B.; Schlecht, S.; Steinhart, M.
Zeitschriftenaufsatz
Journal Article
2010 Effiziente numerische Schweißsimulation großer Strukturen
Brand, M.; Schweizer, F.; Luke, M.
Bericht
Report
2010 Coupling of temperature fluxes induced by electromagnetic induction for transient 3D distortion and residual stress calculation in finite element codes
Brand, M.; Asperheim, J.; Stiele, H.; Pfeiffer, W.
Konferenzbeitrag
Conference Paper
2010 Automated inspection and classification of flip-chip-contacts using scanning acoustic microscopy
Brand, S.; Czurratis, P.; Hoffrogge, P.; Petzold, M.
Konferenzbeitrag
Conference Paper
2010 Extending acoustic microscopy for comprehensive failure analysis applications
Brand, S.; Petzold, M.; Czurratis, P.; Hoffrogge, P.
Konferenzbeitrag
Conference Paper
2010 Elastic limit for surface step dislocation nucleation in face-centered cubic metals: Temperature and step height dependence
Brochard, S.; Hirel, P.; Pizzagalli, L.; Godet, J.
Zeitschriftenaufsatz
Journal Article
2010 Temperierbare Batteriezellenanordnung
Busch, M.; Wüstenhagen, S.
Patent
2010 Numerische Modellierung von Dualphasenstählen bei Herstellung, Verarbeitung und im Bauteil. Teil 1: Mikrostrukturbasierte Simulation vom Warmband bis zum Umformen
Butz, A.; Springub, B.; Roters, F.; Lossau, S.
Konferenzbeitrag
Conference Paper
2010 Virtuelle Werkstoffcharakterisierung für die Umformsimulation
Butz, A.; Helm, D.
Zeitschriftenaufsatz
Journal Article
2010 On the modeling of dual phase steels: Microstructure-based simulation from the hot rolled sheet to the deep drawn component
Butz, A.; Lossau, S.; Springub, B.; Roters, F.
Konferenzbeitrag
Conference Paper
2010 Verfahren zur schwingungsarmen optischen Kraftmessung, insbesondere auch bei hohen Temperaturen
Böhme, W.
Patent
2010 Atomistic simulation of dislocation void interactions under cyclic loading
Cheng, Y.; Bitzek, E.; Weygand, D.; Gumbsch, P.
Zeitschriftenaufsatz
Journal Article
2010 Mikromechanisch basierte Modellierung der Umformgrenzen von Blechwerkstoffen
Descas, R.; Helm, D.
Konferenzbeitrag
Conference Paper
2010 Message from the Scientific Organizers
Dienwiebel, M.; Scherge, M.; Gumbsch, P.
Zeitschriftenaufsatz
Journal Article
2010 Testing and mesoscale modelling of hydrogen assisted cracking of magnesium
Dietzel, W.; Pfuff, M.; Winzer, N.
Zeitschriftenaufsatz
Journal Article
2010 Elastic properties of bonding wires
Dresbach, C.; Mittag, M.; Petzold, M.
Konferenzbeitrag
Conference Paper
2010 Penetration of thin C-60 films by metal nanoparticles
Duffe, S.; Grönhagen, N.; Patryarcha, L.; Sieben, B.; Yin, C.R.; Issendorff, B. von; Moseler, M.; Hövel, H.
Zeitschriftenaufsatz
Journal Article
2010 Surface plasmons for fluorescence enhancement in Sm-doped borate glasses
Dyrba, M.; Miclea, P.-T.; Schweizer, S.
Zeitschriftenaufsatz
Journal Article
2010 Spectral down-conversion in sm-doped borate glasses for photovoltaic applications
Dyrba, M.; Miclea, P.-T.; Schweizer, S.
Konferenzbeitrag
Conference Paper
2010 Spectral down-conversion in Sm-doped borate glasses for photovoltaic applications
Dyrba, M.; Miclea, P.T.; Schweizer, S.
Konferenzbeitrag
Conference Paper
2010 Atomistic simulation methods and their application on fracture
Eidel, B.; Hartmaier, A.; Gumbsch, P.
Aufsatz in Buch
Book Article
2010 The structure of grain boundaries in strontium titanate: Theory, simulation, and electron microscopy
Elsässer, C.; et al.
Zeitschriftenaufsatz
Journal Article
2010 Template-controlled thermolysis of single-source-precursors
Erk, C.; Wehrspohn, R.B.; Steinhart, M.; Schlecht, S.
Zeitschriftenaufsatz
Journal Article
2010 Defect structure of copper doped potassium niobate ceramics
Erünal, E.; Eichel, R.A.; Körbel, S.; Elsässer, C.; Acker, J.; Kungl, H.; Hoffmann, M.J.
Zeitschriftenaufsatz
Journal Article
2010 A crack growth rate model compatible with the wöhler field
Fernández-Canteli, A.; Castillo, E.; Siegele, D.
Konferenzbeitrag
Conference Paper
2010 Celluloseregeneratfaserverstärkte Thermoplaste - Verarbeitung und resultierende Eigenschaften
Fiedler, J.; Busch, M.; Krombholz, A.
Zeitschriftenaufsatz
Journal Article
2010 Mechanical properties of bacterially synthesized nanocellulose hydrogels
Frensemeier, M.; Koplin, C.; Jaeger, R.; Kramer, F.; Klemm, D.
Konferenzbeitrag
Conference Paper
2010 Damage behaviour of nickel-based transition welds under cyclic thermomechanical loading
Friedmann, V.; Siegele, D.
Zeitschriftenaufsatz
Journal Article
2010 Neuartige Werkzeugbeschichtungen für die replizierende Formgebung hochwertiger funktionaler Komponenten. Abschlussbericht Projekt "Nanoskin"
Fromm, A.; Burmeister, F.; Hagen, J.
Bericht
Report
2010 Performance characterization and failure analysis for laminar PZT components
Gall, M.; Thielicke, B.
Konferenzbeitrag
Conference Paper
2010 Infrared birefringence imaging of residual stress and bulk defects in multicrystalline silicon
Ganapati, V.; Schoenfelder, S.; Castellanos, S.; Oener, S.; Koepge, R.; Sampson, A.; Marcus, M.A.; Lai, B.; Morhenn, H.; Hahn, G.; Bagdahn, J.; Buonassisi, T.
Zeitschriftenaufsatz
Journal Article
2010 Infrared birefringence imaging of residual stress and bulk defects in multicrystalline silicon
Ganapati, V.; Schoenfelder, S.; Castellanos, S.; Oener, S.; Buonassisi, T.
Konferenzbeitrag
Conference Paper
2010 Identification of mechanical defects in MEMS using dynamic measurements for application in production monitoring
Gerbach, R.; Ebert, M.; Brokmann, G.; Hein, T.; Bagdahn, J.
Zeitschriftenaufsatz
Journal Article
2010 Thermal emission properties of 2D and 3D silicon photonic crystals
Gesemann, B.; Schweizer, S.L.; Wehrspohn, R.B.
Zeitschriftenaufsatz
Journal Article
2010 Cellular interactions of biodegradable nanorod arrays prepared by nondestructive extraction from nanoporous alumina
Grimm, S.; Martin, J.; Rodriguez, G.; Fernandez-Gutierrez, M.; Mathwig, K.; Wehrspohn, R.B.; Gösele, U.; San Roman, J.; Mijangos, C.; Steinhart, M.
Zeitschriftenaufsatz
Journal Article
2010 Finite element modeling and Raman study of strain distribution in patterned device islands on strained Silicon-on-Insulator (sSOI) substrates
Gu, D.; Baumgart, H.; Naumann, F.; Petzold, M.
Konferenzbeitrag
Conference Paper
2010 Prof. Dr. Hermann Riedel on the occasion of his 65(th) birthday, January 3, 2010
Gumbsch, P.
Zeitschriftenaufsatz
Journal Article
2010 Novel acrylic nanocomposites containing in-situ formed calcium phosphate/layered silicate hybrid nanoparticles for photochemical rapid prototyping, rapid tooling and rapid manufacturing processes
Gurr, M.; Thomann, Y.; Nedelcu, M.; Kübler, R.; Könczöl, L.; Mülhaupt, R.
Zeitschriftenaufsatz
Journal Article
2010 Assessment of space division strategies for generation of adequate computational models for solid foams
Hardenacke, V.; Hohe, J.
Zeitschriftenaufsatz
Journal Article
2010 An enhanced model for probabilistic cleavage fracture assessment considering local constraint effects
Hardenacke, V.; Hohe, J.; Luckow, S.; Siegele, D.
Zeitschriftenaufsatz
Journal Article
2010 Enhancement of local approach models for the assessment of cleavage fracture based on micromechanical investigations
Hardenacke, V.; Hohe, J.; Friedmann, V.; Siegele, D.
Konferenzbeitrag
Conference Paper
2010 Approaches to atomistic triple-line properties from first-principles
Hashibon, A.; Elsässer, C.
Zeitschriftenaufsatz
Journal Article
2010 New insights into skier-triggering of slab avalanches
Heierli, J.; Birkeland, K.W.; Simenhois, R.; Gumbsch, P.
Konferenzbeitrag
Conference Paper
2010 Der Knall im Lawinenhang
Heierli, J.; Zaiser, M.; Gumbsch, P.
Zeitschriftenaufsatz
Journal Article
2010 Design of experiment characterization of microneedle fabrication processes based on dry silicon etching
Held, J.; Gaspar, J.; Ruther, P.; Hagner, M.; Cismak, A.; Heilmann, A.; Paul, O.
Zeitschriftenaufsatz
Journal Article
2010 Thermomechanical representation of the stored energy during plastic deformation
Helm, D.
Zeitschriftenaufsatz
Journal Article
2010 XANES studies on Eu-doped fluorozirconate-based glass ceramics
Henke, B.; Keil, P.; Paßlick, C.; Vogel, D.; Rohwerder, M.; Wiegand, M.; Johnson, J.A.; Schweizer, S.
Konferenzbeitrag
Conference Paper
2010 Saturation effects in the upconversion efficiency of Er-doped fluorozirconate glasses
Henke, B.; Pientka, F.; Johnson, J.A.; Ahrens, B.; Miclea, P.T.; Schweizer, S.
Zeitschriftenaufsatz
Journal Article
2010 Measurement of the deformation field associated with fracture propagation in weak snowpack layers
Herwijnen, A. van; Schweizer, J.; Heierli, J.
Zeitschriftenaufsatz
Journal Article
2010 Micromachined mid-infrared emitter for fast transient temperature operation for optical gas sensing systems
Hildenbrand, J.; Korvink, J.; Wöllenstein, J.; Peter, C.; Kürzinger, A.; Naumann, F.; Ebert, M.; Lamprecht, F.
Zeitschriftenaufsatz
Journal Article
2010 Fast transient temperature operating micromachined emitter for mid-infrared optical gas sensing systems. Design, fabrication, characterization and optimization
Hildenbrand, J.; Peter, C.; Lamprecht, F.; Kürzinger, A.; Naumann, F.; Ebert, M.; Wehrspohn, R.; Korvink, J.G.; Wöllenstein, J.
Konferenzbeitrag
Conference Paper
2010 Theoretical investigation of {110} generalized stacking faults and their relation to dislocation behavior in perovskite oxides
Hirel, P.; Marton, P.; Mrovec, M.; Elsässer, C.
Zeitschriftenaufsatz
Journal Article
2010 Co-cultures of primary cells on self-supporting nanoporous alumina membranes
Hoess, A.; Thormann, A.; Friedmann, A.; Aurich, H.; Heilmann, A.
Zeitschriftenaufsatz
Journal Article
2010 Strategies for numerical prediction of the uncertainty in the material response of solid foams
Hohe, J.; Beckmann, C.; Hardenacke, V.
Konferenzbeitrag
Conference Paper
2010 On the potential of tungsten-vanadium composites for high temperature application in nuclear fusion
Hohe, J.; Gumbsch, P.
Konferenzbeitrag
Conference Paper
2010 Behavior of cracks in cladded components under consideration of residual stresses
Hohe, J.; Brand, M.; Siegele, D.
Konferenzbeitrag
Conference Paper
2010 On the potential of tungsten-vanadium composites for high temperature application with wide-range thermal operation window
Hohe, J.; Gumbsch, P.
Zeitschriftenaufsatz
Journal Article
2010 Behaviour of sub-clad and through-clad cracks under consideration of the residual stress field
Hohe, J.; Brand, M.; Siegele, D.
Zeitschriftenaufsatz
Journal Article
2010 Numerical prediction of the macroscopic material response for the design of solid foams with structural hierarchy
Hohe, J.; Beckmann, C.; Reinfried, M.; Luthardt, F.
Konferenzbeitrag
Conference Paper
2010 Load and frequency interaction in dynamic buckling of soft-core sandwich plates and shells
Hohe, J.
Zeitschriftenaufsatz
Journal Article
2010 An enhanced probabilistic model for cleavage fracture assessment accounting for local constraint effects
Hohe, J.; Hardenacke, V.; Luckow, S.; Siegele, D.
Konferenzbeitrag
Conference Paper
2010 Constraint corrected cleavage fracture assessment based on tests of standard and small scale cruciform specimens
Hohe, J.; Hardenacke, V.; Siegele, D.
Konferenzbeitrag
Conference Paper
2010 Development of nonuniform residual stresses during anodic bonding
Horn, G.P.; Gerbach, R.; Lin, T.-W.; Bernach, M.; Brand, S.; Johnson, H.T.
Konferenzbeitrag
Conference Paper
2010 Friction and wear studies of AISi liners
Jiao, M.; Rehl, A.; Sagel, A.; Mollenhauer, O.; Scherge, M.
Konferenzbeitrag
Conference Paper
2010 Simulation of void growth and coalescence in ferritic steels
Kadkhodapour, J.; Andrieux, F.; Ziaei Rad, S.; Schmauder, S.
Konferenzbeitrag
Conference Paper
2010 Besser und günstiger Walzen mit Werkzeugen und Komponenten aus Hochleistungskeramik
Kailer, A.
Zeitschriftenaufsatz
Journal Article
2010 Europäische Nachrichten aus Jülich: Neue keramische Werkstoffe für die Walztechnik
Kailer, A.
Zeitschriftenaufsatz
Journal Article
2010 Werkzeuge und Komponenten aus Hochleistungskeramik
Kailer, A.
Zeitschriftenaufsatz
Journal Article
2010 Vorrichtung und Verfahren zum Betrieb eines tribologisch belasteten Bauteils
Kailer, A.; Amann, T.; Krummhauer, O.; Gumbsch, P.
Patent
2010 Electronic structure and transport properties of transition-metaI/ SrTi03(100) heterojunctions
Kalivoda, E.M.
Konferenzbeitrag
Conference Paper
2010 Damage mechanisms in silicon nitride wire-rolling tools: Lab-scale experiments and correlation with finite element modeling
Khader, I.; Kailer, A.
Zeitschriftenaufsatz
Journal Article
2010 Verbesserte Methoden zur Lebensdauerberechnung von Abgasturbolader-Radialverdichterräder aus hochwarmfesten Aluminiumlegierungen
Khalil, O.; Schweizer, C.; Hartrott, P. von; Lang, K.-H.; Riedel, H.; Seifert, T.
Konferenzbeitrag
Conference Paper
2010 Untersuchungen zur Charakterisierung von crashrelevantem Bauteilverhalten
Kleine, A.; Koch, H.; Böhme, W.
Zeitschriftenaufsatz
Journal Article
2010 Ceramic substrates with aluminum metallization for power application
Knoll, H.; Weidenauer, W.; Ingram, P.; Bennemann, S.; Brand, S.; Petzold, M.
Konferenzbeitrag
Conference Paper
2010 Increase of the strength of screen printed silicon solar cells by post treatments
Kohn, C.; Hug, M.; Kübler, R.; Krappitz, M.; Kleer, G.
Konferenzbeitrag
Conference Paper
2010 Spin-dependent transport through interacting graphene armchair nanoribbons
Koller, S.; Mayrhofer, L.; Grifoni, M.
Zeitschriftenaufsatz
Journal Article
2010 Formation of vacancies and copper substitutionals in potassium sodium niobate under various processing conditions
Korbel, S.; Marton, P.; Elsasser, C.
Zeitschriftenaufsatz
Journal Article
2010 Design and construction of a novel tribometer with online topography and wear measurement
Korres, S.; Dienwiebel, M.
Zeitschriftenaufsatz
Journal Article
Diese Liste ist ein Auszug aus der Publikationsplattform Fraunhofer-Publica

This list has been generated from the publication platform Fraunhofer-Publica